Kmc-controls CTE-5202W Uživatelský manuál stáhnout pdf (Strana 1)

CTE-5202 Electronic Room Thermostat with LCD Display 1 Installation and Operation Guide

1. Ifthethermostatislockedonthebackplate,turn

thetwohexscrews(inthetwo outermost holes)

inthebackplateCLOCKWISEuntilthey(just)

clearthecover.Swingthethermostatupand

awayfromthebackplatetoremoveit.

Installation and Operation Guide

Electronic Room Thermostat with LCD Display

CTE-5202

Installation

Rough-in Preparation

For optimum temperature sensor performance, the

thermostat must be mounted on an interior wall

and away from heat sources, sunlight, windows,

air vents, and air circulation obstructions (e.g.,

curtains, furniture).

Ifreplacinganexistingthermostat,labelwiresas

neededforreferencewhenremovingtheexisting

thermostat.

Completerough-inwiringateachlocationpriorto

thermostatinstallation.Cableinsulationmustmeet

localbuildingcodes.

Installation 1

Rough-in Preparation 1

Mounting and Wiring 1

Operation 2

Change Setpoint 2

Change Conﬁguration 2

External Input (AI1) 4

Maintenance 4

Accessories 4

Additional Resources 4

Important Notices 4

CAUTION

To prevent damage to the board, do not insert

a screwdriver into any holes other than the two

outermost holes. To prevent mounting screw heads

from touching the circuit board in the thermostat, use

only the mounting screws supplied by KMC Controls.

Using other screws may damage the thermostat. Do

not turn screws in farther than necessary to remove

the cover.

2. Routethecablethroughthebackplate.

AI1

AO1

AO2

SET

POINT

A B C D E

3.25in. 5.16in. 0.88in. 3.25in. 0.15in.diameter

83mm 116mm 22mm 83mm 3.81mmdiameter

Mounting and Wiring

ThethermostatmustNOTbe:

• Mountedonanexteriorwall.

• Mountedonornearalargethermalmass(e.g.,

concreteblockwall).

• Blockedfromnormalaircirculationbyobstruc-

tions.

•

Exposedtoheatsources(e.g.,lights,computers,

copiers,orcoeemakers)ortosunlight(atany

timeoftheday).

• Exposedtodrasfromwindows,diusers,or

returns.

•

Exposedtoairowthroughtheconduit(from

leaksinplenumducts)—putplumber’spuyor

similarmaterialinsidetheconduittoblockair

ow.

NOTE: For specications and other information,

see the CTE-5202 Data Sheet.

NOTE: For detailed applications, cross-references,

accessories, and other information, see the

CTE-5202 Applications Guide.

1 2 3 4

Shrnutí obsahu

Strany 1 - CAUTION

CTE-5202 Electronic Room Thermostat with LCD Display 1 Installation and Operation Guide1. Ifthethermostatislockedonthebackplate,turnt

Strany 2 - Operation

CTE-5202 Electronic Room Thermostat with LCD Display 2 Installation and Operation GuideOperationChange SetpointTochangethesetpoint:1. Pusht

Strany 3 - SEQUENCE # 2:

CTE-5202 Electronic Room Thermostat with LCD Display 3 Installation and Operation GuideNOTE: AO1istypicallyusedtocontrolthecool-ingout

Strany 4 - Important Notices

CTE-5202 Electronic Room Thermostat with LCD Display 4 Installation and Operation GuideAccessoriesMaintenanceRemovedustasnecessaryfromholes

Příbuzné modely CTE-5202

Komentáře k této Příručce

Žádné komentáře

Kmc-controls CTE-5202W Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Senzory Kmc-controls CTE-5202W. KMC Controls CTE-5202W User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely CTE-5202

Komentáře k této Příručce

Kmc-controls CTE-5202W Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Senzory Kmc-controls CTE-5202W. KMC Controls CTE-5202W User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely CTE-5202

Komentáře k této Příručce

Související produkty a manuály pro Senzory Kmc-controls CTE-5202W