Kmc-controls MCP-3631 Series Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Senzory Kmc-controls MCP-3631 Series. KMC Controls MCP-3631 Series User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 2
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
MCP-3631 Series 1 Installation Guide
Installation Guide
Rotary Pneumatic Damper Actuators
MCP-3631 Series
Mounting
Mounting Method #1, for 1/2-inch diameter shas
1. Locatea3/16-inchcross-holeinthesha.
2. Align the hole parallel, or perpendicular, to the damper blade
depending on how the actuator will be mounted and whether
the damper is to be Normally Open or Normally Closed.
3. Insertdrivepin(HLO-1008)andslideactuatorontotheshato
engage.
4. Note the direction of rotation.
5. Slidetheretainer(HLO-1009)ontotheshatolockactuator.
6. Rotate the actuator to the desired damper position.
7. Installtheanti-rotationbracket(HMO-1003)provided.
Mounting Method #2, for 1/2-inch diameter shas
1. SlidetheHLO-1016collarontothesha.
2. Slidetheactuatorontoshanotingdirectionalrotation.
3. Slidedrivebushing(HLO-1006)ontotheshaandintothe
actuator.
4. Align the actuator with the damper.
5. Lockthecollaranddrivebushingsetscrews.
6. Installtheanti-rotationbracket(HMO-1003)provided.
Mounting Method #3, for 3/8-inch diameter shas
1. Note the direction of rotation.
2. Slidetheshaadaptor(HLO-1011)intotherearoftheactuator.
3. Slidetheactuatorontothesha.
4. Slidethedrivebushing(HLO-1006)ontotheshaandintothe
actuator.
5. Align the actuator with the damper.
6. Align the drive bushing setscrews with the slots in the adaptor
and tighten the screws.
7. Installtheanti-rotationbracket(HMO-1003)provided.
Mounting Method #4, for 3/8-inch SQUARE shas
1. Note the direction of rotation.
2. Slidethecollar(HLO-1016)ontoshaorcorrectlyposition
HLO-1009ondampershatoholdactuatorinposition.
3. Slidetheactuatorontothesha,notingthedirectional
rotation.
4. Slidethedrivebushing(HLO-1006)ontothesha.
5. Align the actuator with the damper.
6. Tighten the collar and drive bushing setscrews.
7. Installtheanti-rotationbracket(HMO-1003)provided.
(Includes HLO-1006 and HLO-1016)
(HLO-1006)(HLO-1016)
BUSHING HLO-1016
Zobrazit stránku 0
1 2

Shrnutí obsahu

Strany 1 - Installation Guide

MCP-3631 Series 1 Installation GuideInstallation GuideRotary Pneumatic Damper ActuatorsMCP-3631 Series MountingMounting Method #1, for 1/2-inch dia

Strany 2 - Specifications

MCP-3631 Series 2 Installation GuideConnections♦ Use 1/4-inch (6 mm) O.D. FR polyethylene tubing♦ Useonlyclean,drycontrolair.Noaemptshoul

Komentáře k této Příručce

Žádné komentáře